1982 Checker Marathon Bulb Replacement Table
Bulb Location | Bulb Manufacturer's No. |
Headlight | |
-- Inner | 4001 - Modern alternative is 5001 |
-- Outer | 4002 - Modern alternative is 5006 |
High Beam Indicator (in rear of speedometer) | 158 |
Parking Light | 1157 |
Taillight (replacement access from outside, not through trunk) | 1157 |
Stop Light | 1157 |
Directional Signal | |
-- Front | 1157 |
-- Rear | 1157 |
-- Indicator (in rear of speedometer) | 158 |
License Plate Lamp | 97 |
Fuel Gauge and Warning Lights (in rear of fuel gauge) | 158 |
Back-Up Light | 1295 |
Dome Light | 551 |
Radio Light | 57 (optional) |
Parking Brake Light | 158 |
Side Marker Lamps | 194 |
Fiber Optic Light Source | 558 |
Speedometer Light | 158 |
Transmission Indicator Light | 1893 |
Seatbelt Reminder Lamp (rear of fuel gauge) | 1893 |
Copied from 1982 owner's manual for Checker Marathon. Because it's easier than pulling the bulb and trying to figure out what it is.
Procedures/Notes
Headlights - Remove outer trim piece (four Philips head screws); remove ring that holds bulb in place (three Philips head screws); pull old bulb out of socket and put in the new one; put it all back together. When low-beams are on, only the outer bulbs (4002/5006) are powered. When high-beams are on, outer and inner (4001/5001) bulbs are powered.